Product Listing:  WAT022440 - PREPLC SCALE-UP KIT   to   WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Sorted by Category
  Product    
info

WAT022440 - PREPLC SCALE-UP KIT

Part Number: WAT022440
WAT022440 - PREPLC SCALE-UP KIT
Part Number: WAT022440
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

WAT022441 - PREPLC 40MM ASSEMBLY

Part Number: WAT022441
WAT022441 - PREPLC 40MM ASSEMBLY
Part Number: WAT022441
Products > Chromatography Consumables & Columns > Accessories > Radial Compression

info

WAT022453 - O-Ring Buna-N 2-030, (RF Feed Thru)

Part Number: WAT022453

This spare part is a Waters Quality part

WAT022453 - O-Ring Buna-N 2-030, (RF Feed Thru)
Part Number: WAT022453
Products > Chromatography Consumables & Columns > Accessories > Guard Hardware

This spare part is a Waters Quality part

info

WAT022476 - Polypropylene 8 x 40 mm snap neck Total Recovery Vial with Polyethylene Septumless Cap, 700 µL,100/pkg

Part Number: WAT022476

Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

WAT022476 - Polypropylene 8 x 40 mm snap neck Total Recovery Vial with Polyethylene Septumless Cap, 700 µL,100/pkg
Part Number: WAT022476
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Dimensions 8 x 40 mm
Format Total Recovery Vial
GlassType Polypropylene
Septa Type Polyethylene Septumless Cap
Units in Package 100/pkg
Volume Capacity 700 µL

info

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg

Part Number: WAT022479

These vials with come pre-assembled for use in dissolution systems.

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg
Part Number: WAT022479
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 500/pkg
Volume Capacity 1 mL

info

WAT022861 - PTFE/silicone Septum, 144/pkg

Part Number: WAT022861

Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps.

WAT022861 - PTFE/silicone Septum, 144/pkg
Part Number: WAT022861
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Unicam
Certified Not Certified
Dimensions 15 x 45mm
Format PTFE/silicone Septum
Units in Package 144/pkg

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022996

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system. Part number WAT033391 has been replaced by this new part number WAT022996.

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022996
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.010 in. (0.25 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022997

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022997
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK

info

WAT022998 - 1/16 in. OD x .020 in. ID x 5 ft (1.6mm OD x .508 mm ID x 1.5m), PEEK

Part Number: WAT022998

Waters® tubing and fittings are care?fully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system. Part number WAT033392 has been replaced by this new part number WAT022998.

WAT022998 - 1/16 in. OD x .020 in. ID x 5 ft (1.6mm OD x .508 mm ID x 1.5m), PEEK
Part Number: WAT022998
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.020 in. (0.508 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022999 - Peek Tubing and Fitting Kit

Part Number: WAT022999

The PEEK Tubing and Fitting Kit includes the following: 12 PEEK ferrules, 6 compression screws 10-32 long, 6 compression screws 10-32 short, one PEEK tubing .005in. x 1/16in. x 60in., one PEEK tubing .010in. x 1/16in. x 60in., and 12 compression screw knobs

WAT022999 - Peek Tubing and Fitting Kit
Part Number: WAT022999
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK Tubing
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT023321 - AP-5 Glass Column, 50x100 mm, 1/pkg

Part Number: WAT023321

Complete AP-5 Glass Column, 50x100 mm

WAT023321 - AP-5 Glass Column, 50x100 mm, 1/pkg
Part Number: WAT023321
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 100 mm
Units in Package 1/pkg

info

WAT023322 - AP-5 Glass Column, 50x200 mm, 1/pkg

Part Number: WAT023322

Complete AP-5 Glass Column, 50x200 mm

WAT023322 - AP-5 Glass Column, 50x200 mm, 1/pkg
Part Number: WAT023322
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 200 mm
Units in Package 1/pkg

info

WAT023323 - AP-5 Glass Column, 50x300 mm, 1/pkg

Part Number: WAT023323

Complete AP-5 Glass Column, 50x300 mm

WAT023323 - AP-5 Glass Column, 50x300 mm, 1/pkg
Part Number: WAT023323
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 300 mm
Units in Package 1/pkg

info

WAT023326 - AP-5 Glass Column, 50x600 mm, 1/pkg

Part Number: WAT023326

Complete AP-5 Glass Column, 50x600 mm

WAT023326 - AP-5 Glass Column, 50x600 mm, 1/pkg
Part Number: WAT023326
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 600 mm
Units in Package 1/pkg

info

WAT023332 - AP-5 Glass Column 50 x 200 mm, 1/pkg

Part Number: WAT023332

Empty 50 x 200mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023332 - AP-5 Glass Column 50 x 200 mm, 1/pkg
Part Number: WAT023332
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 200 mm
Units in Package 1/pkg

info

WAT023333 - AP-5 Glass Column 50 x 300 mm, 1/pkg

Part Number: WAT023333

Empty 50 x 300mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023333 - AP-5 Glass Column 50 x 300 mm, 1/pkg
Part Number: WAT023333
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 300 mm
Units in Package 1/pkg

info

WAT023336 - AP-5 Glass Column 50 x 600 mm 1/pkg

Part Number: WAT023336

Empty 50 x 600mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023336 - AP-5 Glass Column 50 x 600 mm 1/pkg
Part Number: WAT023336
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 600 mm
Units in Package 1/pkg

info

WAT023343 - AP-5 Filter, 50 mm, 2/pk

Part Number: WAT023343

Filters (5 pack) for Water AP-5 Advanced Purification (AP) Column.

WAT023343 - AP-5 Filter, 50 mm, 2/pk
Part Number: WAT023343
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
ID 50 mm
Units in Package 2/pkg

info

WAT023345 - O-RINGS AP-5 5/PK

Part Number: WAT023345

O-Rings Inlet and Outlet (5 pack) for Water AP-5 Advanced Purification (AP) Column.

WAT023345 - O-RINGS AP-5 5/PK
Part Number: WAT023345
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023347 - AP-5 Ferrule, 10/pk

Part Number: WAT023347

Ferrule for for Water AP-5 Advanced Purification (AP) Column.

WAT023347 - AP-5 Ferrule, 10/pk
Part Number: WAT023347
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023349 - AP-5 Inlet Connect Assy 1/pkg

Part Number: WAT023349

Inlet connector for Water AP-2 Advanced Purification (AP) Column.

WAT023349 - AP-5 Inlet Connect Assy 1/pkg
Part Number: WAT023349
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023370 - AP-5 Plastic Shield, 50x100 mm, 1/pkg

Part Number: WAT023370

Waters Advanced Purification (AP) columns feature non-metallic construction and adjustable bed height with easy to use coarse and fine adjustments. The AP Glass columns are available in a variety of dimensions. Glass Tubes, Column Jackets, Plastic Shields and other replacement parts are sold separately.

WAT023370 - AP-5 Plastic Shield, 50x100 mm, 1/pkg
Part Number: WAT023370
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Format AP Plastic Shield
ID 50 mm
Length (mm) 100 mm
Units in Package 1/pkg

info

WAT023371 - AP-5 Plastic Shield, 50x200 mm, 1/pkg

Part Number: WAT023371

Waters Advanced Purification (AP) columns feature non-metallic construction and adjustable bed height with easy to use coarse and fine adjustments. The AP Glass columns are available in a variety of dimensions. Glass Tubes, Column Jackets, Plastic Shields and other replacement parts are sold separately.

WAT023371 - AP-5 Plastic Shield, 50x200 mm, 1/pkg
Part Number: WAT023371
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Format AP Plastic Shield
ID 50 mm
Length (mm) 200 mm
Units in Package 1/pkg

info WAT023401 - Kalrez Replacement O-ring, 2/pkg
Part Number: WAT023401
Products > Chromatography Consumables & Columns > Accessories

info

WAT023501 - Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023501

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT023501 - Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023501
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023513 - Sep-Pak Aminopropyl (NH2) Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023513

Sep-Pak Amino Propyl (NH2) Plus Light cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023513 - Sep-Pak Aminopropyl (NH2) Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023513
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Aminopropyl (NH2)
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023519 - Sep-Pak Diol Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023519

Silica-based polar bonded phase with neutral character; can be used as an alternative to silica in normal-phase applications, where the acidic character of silica is undesirable or as very weakly interacting phase in aqueous applications; applications include antibiotics from cosmetics; isolation of proteins or peptides by hydrophobic interaction chromatography.

WAT023519 - Sep-Pak Diol Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023519
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Diol
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Reversed-phase
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023525 - Sep-Pak Accell Plus QMA Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023525

Sep-Pak Accell Plus QMA Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023525 - Sep-Pak Accell Plus QMA Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023525
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023531

Sep-Pak Accell Plus CM Plus Light cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023531
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Plus Light Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH