Product Listing:  700000618 - CapLC Plunger Tip, 25µL, 10/pkg   to   700000437 - Ion Block, Original Source

Sorted by Brand
  Product    
info

700000618 - CapLC Plunger Tip, 25µL, 10/pkg

Part Number: 700000618

The CapLC System Plunger Tip on the autosampler syringe forms a seal in the syringe. It should be replaced if the plunger is worn or the syringe is leaking.The 25µL plunger tip is the standard size and is used with the standard 25µL syringe.

700000618 - CapLC Plunger Tip, 25µL, 10/pkg
Part Number: 700000618
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Capillary LC
Products CapLC System
CapLC XE System
Replacement Schedule As Needed

info

700000611 - 2790/2795 Syringe, 1000µL

Part Number: 700000611

The 2790 1000µL Syringe is one of four optional syringes that can be installed. When changing a syringe, be sure to enter the new syringe size in the Configuration screen.

700000611 - 2790/2795 Syringe, 1000µL
Part Number: 700000611
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule As Needed

info

700000610 - 3/16in. Open End Wrench

Part Number: 700000610

In addition to the Separations Modules, the 3/4in. open end wrench is used on the 10,000psi nanoACQUITY system.

700000610 - 3/16in. Open End Wrench
Part Number: 700000610
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Separations Module
nanoACQUITY
Products 2790 Separations Module
2795 Separations Module
High Pressure nanoACQUITY UPLC Sample Manager
Replacement Schedule No

info

700000606 - Nano-flow Tee Splitter

Part Number: 700000606

The Nano-flow Tee Splitter is used to divert suitable flow to the MS unit.

700000606 - Nano-flow Tee Splitter
Part Number: 700000606
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
LCT Premier
Q-Tof micro Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro micro Mass Spectrometer
SYNAPT™ MS
Synapt High Definition MS System™
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

700000604 - Pump Tray Valve Rotor (organic)

Part Number: 700000604

This spare part is a Waters Quality part.

700000604 - Pump Tray Valve Rotor (organic)
Part Number: 700000604
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Rotors/stators
Product Category Capillary LC
Products CapLC System
Replacement Schedule As Needed

info

700000579 - M3 x 3 Grub Screws, (20PK)

Part Number: 700000579

Probe Assembly Grub Screw

700000579 - M3 x 3 Grub Screws, (20PK)
Part Number: 700000579
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products 3100 Mass Detector
EMD 1000 Mass Spectrometer
Platform LCZ Mass Detector
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
Single Quad Detector
Tandem Quadrupole Detector
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed

info

700000574 - Vapor Trap (10mm OD Bottle Trap)

Part Number: 700000574

To properly vent the exhaust vapor to waste, a drying gas bottle is used to trap any condensate that forms from vented vapor exiting the detector.

700000574 - Vapor Trap (10mm OD Bottle Trap)
Part Number: 700000574
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Detectors
Products 2420 Light Scattering Detector
Replacement Schedule As Needed

info

700000573 - Oil Return Kit

Part Number: 700000573

This spare part is a Waters Quality part.

700000573 - Oil Return Kit
Part Number: 700000573
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Vacuum fittings/components
Product Category Mass Spectrometry
Products LCT Premier
LCT Premier XE
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Quattro Ultima Mass Spectrometer
Replacement Schedule As Needed

info

700000572 - HV Corona Cable APCI

Part Number: 700000572

This spare part is a Waters Quality part.

700000572 - HV Corona Cable APCI
Part Number: 700000572
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Cables
Product Category Mass Spectrometry
Products Platform LCZ Mass Detector
ZMD Mass Spectrometer
Replacement Schedule As Needed

info

700000571 - Lapping Film

Part Number: 700000571

This spare part is a Waters Quality part.

700000571 - Lapping Film
Part Number: 700000571
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Mass Spectrometry
Products ZMD Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

700000565 - 2790/2795 Syringe, 500µL (std)

Part Number: 700000565

The 2790 Separations Module is equipped with a standard 500µL syringe. This syringe, coupled with the standard 50µL sample loop and 128µL holding loop provides good accuracy and repeatability performance in a short amount of time for typical chromatographic sample volumes (5 to 50µL).

700000565 - 2790/2795 Syringe, 500µL (std)
Part Number: 700000565
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule As Needed

info

700000564 - 2790/2795 Syringe, 100µL

Part Number: 700000564

The 2790 100µL Syringe is one of four optional syringes that can be installed. Be sure to enter the new syringe size in the Configuration screen of the Configure menu from the main screen.

700000564 - 2790/2795 Syringe, 100µL
Part Number: 700000564
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule As Needed

info

700000563 - 2790/2795 Sample Loop, 2000µL

Part Number: 700000563

The optional 2000µL sample loop is one of the larger sample loops which can be installed to inject full loop sample volumes other than 50 µL.

700000563 - 2790/2795 Sample Loop, 2000µL
Part Number: 700000563
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000562 - 2790/2795 Sample Loop, 500µL

Part Number: 700000562

The optional 500µL sample loop is one of the larger sample loops which can be installed to inject full loop sample volumes other than 50 µL.

700000562 - 2790/2795 Sample Loop, 500µL
Part Number: 700000562
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000561 - 2790/2795 Sample Loop, 100µL

Part Number: 700000561

The optional 100µL sample loop is one of the larger sample loops which can be installed to inject full loop sample volumes other than 50 µL.

700000561 - 2790/2795 Sample Loop, 100µL
Part Number: 700000561
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000560 - 2790/2795 Sample Loop, 50µL, (Std)

Part Number: 700000560

The 2790 Separations Module uses a standard 50µL sample loop. This loop has the ability to inject samples of 50µL in Full Loop mode, and samples less than 50µL in partial loop mode.

700000560 - 2790/2795 Sample Loop, 50µL, (Std)
Part Number: 700000560
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000559 - Sample Loop, 20µL

Part Number: 700000559

The 20 microliter sample loop is one of the smaller sample loops that can be installed to improve the volume repeatability for sample volumes less than 50 microliters..

700000559 - Sample Loop, 20µL
Part Number: 700000559
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Injectors
Separations Module
Products 2700 Sample Manager
2767/2747 Sample Manager
2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000558 - 2790/2795 Sample Loop, 5µL

Part Number: 700000558

The 5µL sample loop is one of the smaller sample loops that can be installed to improve the volume repeatability for sample volumes less than 50 µL.

700000558 - 2790/2795 Sample Loop, 5µL
Part Number: 700000558
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
Replacement Schedule As Needed

info

700000556 - 2790/2795 Holding Loop, 500µL

Part Number: 700000556

The optional 500-µL Sample Holding Loop is available to modify the sample management system for larger injection volumes.

700000556 - 2790/2795 Holding Loop, 500µL
Part Number: 700000556
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule No

info

700000555 - 2790/2795 Holding Loop, 128µL

Part Number: 700000555

The Holding Loop contains a specific volume, where the sample is held until the sample is injected. It is flexible enough to travel back and forth with needle movement. The 2790/2795 Separations Module uses a standard 128-µL holding loop.

700000555 - 2790/2795 Holding Loop, 128µL
Part Number: 700000555
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2790 Separations Module
2795 Separations Module
2796 Bioseparations Module
Replacement Schedule No

info

700000550 - Waste Tubing, Polyethylene, 10ft.

Part Number: 700000550

This tubing measures 5/16in. OD x 3/16in. ID x 10ft.

700000550 - Waste Tubing, Polyethylene, 10ft.
Part Number: 700000550
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Capillary LC
Products CapLC System
CapLC XE System
Replacement Schedule As Needed

info

700000471 - 10mL Reagent Syringe

Part Number: 700000471

This spare part is a Waters Quality part.

700000471 - 10mL Reagent Syringe
Part Number: 700000471
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager
Replacement Schedule As Needed

info

700000470 - 250µL Syringe

Part Number: 700000470

This spare part is a Waters Quality part.

700000470 - 250µL Syringe
Part Number: 700000470
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Mass Spectrometry
Products 2700 Sample Manager
MassPrep Station
Replacement Schedule As Needed

info

700000466 - Union, 6mm-6mm Nitrogen Fittings

Part Number: 700000466

This spare part is a Waters Quality part.

700000466 - Union, 6mm-6mm Nitrogen Fittings
Part Number: 700000466
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

700000465 - Kit, Union Diff. Dia. 4mm-6mm

Part Number: 700000465

4mm-6mm differential gas line union..

700000465 - Kit, Union Diff. Dia. 4mm-6mm
Part Number: 700000465
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Mass Spectrometry
Products 3100 Mass Detector
EMD 1000 Mass Spectrometer
LCT Premier
LCT Premier XE
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Premier Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro Premier Mass Spectrometer
Quattro Premier XE Mass Spectrometer
Single Quad Detector
Tandem Quadrupole Detector
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

700000463 - ESI Probe Consumables Kit

Part Number: 700000463

The ESI Probe Consumable Kit contains all the consumables necessary for the probe.

700000463 - ESI Probe Consumables Kit
Part Number: 700000463
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Mass Spectrometry
Products LCT Mass Spectrometer
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
Replacement Schedule As Needed

info

700000461 - Z-Spray Source Consum. Kit

Part Number: 700000461

Kit containing replacements for consumable items on the Z-Spray source.

700000461 - Z-Spray Source Consum. Kit
Part Number: 700000461
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Nuts/bolts/screws
Product Category Mass Spectrometry
Products Platform LCZ Mass Detector
ZMD Mass Spectrometer
Replacement Schedule As Needed

info

700000457 - Baffle Plate

Part Number: 700000457

This spare part is a Waters Quality part.

700000457 - Baffle Plate
Part Number: 700000457
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products EMD 1000 Mass Spectrometer
LCT Mass Spectrometer
LCT Premier
LCT Premier XE
Q-Tof II Mass Spectrometer
Q-Tof 1 Mass Spectrometer
Q-Tof API US Mass Spectrometer
Q-Tof Ultima API Mass Spectrometer
Q-Tof Ultima Global Mass Spectrometer
Q-Tof Ultima MALDI Mass Spectrometer
Q-Tof micro Mass Spectrometer
Quattro LC Mass Spectrometer
Quattro Ultima Mass Spectrometer
Quattro Ultima PT Mass Spectrometer
Quattro micro Mass Spectrometer
ZMD Mass Spectrometer
ZQ Mass Spectrometer
Replacement Schedule As Needed
sparepartsystemscategory LCMS

info

700000454 - O-ring, Viton, 2.2 X 1.6mm, 5/pkg

Part Number: 700000454

This spare part is a Waters Quality part.

700000454 - O-ring, Viton, 2.2 X 1.6mm, 5/pkg
Part Number: 700000454
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category O-rings
Product Category Mass Spectrometry
Products LCT Premier
LCT Premier XE
Q-Tof II Mass Spectrometer
Q-Tof micro Mass Spectrometer
Replacement Schedule As Needed

info

700000437 - Ion Block, Original Source

Part Number: 700000437

Original MK1 Ion Block for the ZMD2000

700000437 - Ion Block, Original Source
Part Number: 700000437
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Mass Spectrometry
Products Q-Tof 1 Mass Spectrometer
ZMD Mass Spectrometer
Replacement Schedule No
sparepartsystemscategory LCMS