Product Listing:  WAT272620 - 2.5mL Syringe   to   WAT270985 - SS Tubing, Transducer to V2

Sorted by Brand
  Product    
info

WAT272620 - 2.5mL Syringe

Part Number: WAT272620

The 2.5mL syringe is an optional syringe for the 2700 Sample Manager.

WAT272620 - 2.5mL Syringe
Part Number: WAT272620
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272619 - Seal, 1.0mL Syringe

Part Number: WAT272619

The 1mL syringe seal requires periodic replacement. The frequency depends on the duty cycle of the pump, the type of fluids being run through the system, the size of the syringe, and how well the instrument is maintained. Replace the seal if it is leaking or damaged.

WAT272619 - Seal, 1.0mL Syringe
Part Number: WAT272619
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272618 - O-Ring, 1.0mL Syringe

Part Number: WAT272618

The O-ring for the 1mL syringe sits beneath the seal. It will need to be replaced if damaged by removing the seal.

WAT272618 - O-Ring, 1.0mL Syringe
Part Number: WAT272618
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272617 - 1.0mL Syringe

Part Number: WAT272617

The 1.0mL syringe is an optional syringe for the 2700 Sample Manager and the 2767/2747 of the Autopurification System.

WAT272617 - 1.0mL Syringe
Part Number: WAT272617
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager
Replacement Schedule As Needed

info

WAT272615 - Rotor, 2700

Part Number: WAT272615

This spare part is a Waters Quality part.

WAT272615 - Rotor, 2700
Part Number: WAT272615
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Rotors/stators
Product Category Injectors
Products 2700 Sample Manager

info

WAT272080 - 500µL Syringe

Part Number: WAT272080

The 500µL syringe is the standard syringe used on the 2700 Sample Manager.

WAT272080 - 500µL Syringe
Part Number: WAT272080
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272079 - O-Ring, 500µL Syringe

Part Number: WAT272079

The O-ring for the 500µL syringe sits beneath the seal. It will need to be replaced if damaged by removing the seal.

WAT272079 - O-Ring, 500µL Syringe
Part Number: WAT272079
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272078 - Seal, 500µL Syringe

Part Number: WAT272078

The 500µL syringe seal requires periodic replacement. The frequency depends on the duty cycle of the pump, the type of fluids being run through the system, the size of the syringe, and how well the instrument is maintained. Replace the seal if it is leaking or damaged.

WAT272078 - Seal, 500µL Syringe
Part Number: WAT272078
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Syringes
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager

info

WAT272070 - Cap-piercing probe

Part Number: WAT272070

Designed for the 2700 Sample Manager, this cap-piercing probe has a polytetrafluoroethylene (PTFE) coating and can pierce standard silicone-coated PTFE septa on HPLC systems without bending.

WAT272070 - Cap-piercing probe
Part Number: WAT272070
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Injectors
Products 2700 Sample Manager
Replacement Schedule Annually

info

WAT272065 - Lubrication Kit

Part Number: WAT272065

The Lubrication Kit is used to lubricate the lead screw on the 2700 Sample Manager. Lubricate the lead screw if the pump is making an unususal noise or if the syringe is stalling frequently.

WAT272065 - Lubrication Kit
Part Number: WAT272065
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Injectors
Products 2700 Sample Manager
2767/2747 Sample Manager
Replacement Schedule As Needed

info

WAT272059 - Allen Wrench Set, Metric

Part Number: WAT272059

This spare part is a Waters Quality part.

WAT272059 - Allen Wrench Set, Metric
Part Number: WAT272059
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tools
Product Category Injectors
Products 2700 Sample Manager
Replacement Schedule Monthly

info

WAT272045 - 2700 PERFORMANCE MAINTENANCE KIT

Part Number: WAT272045

The Waters® Performance Maintenance Kit for the 2700 Sample Manager contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis. The Waters® Performance Maintenance Kit includes the following parts: one 4-port valve, several tubing assemblies (interconnect tubing, reagent tube, probe tubing, waste tube, inlet/outlet tube, miniwash tube, interconnect miniwash tube, and inlet/outlet diverter valve tube), one 500µL syringe seal and o-ring, one cap-piercing probe, one standard insulation block, one lube kit, one fuse kit, one Rheodyne rotor and one probe fitting port.

WAT272045 - 2700 PERFORMANCE MAINTENANCE KIT
Part Number: WAT272045
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit Yes
Part Category PM Kits
Product Category Injectors
Products 2700 Sample Manager
Replacement Schedule Annually

info

WAT271082 - Solvent Bottle Tray

Part Number: WAT271082

The Solvent Bottle Tray holds four 1-Liter bottles. The solvents should be placed above the gradient proportioning valve.

WAT271082 - Solvent Bottle Tray
Part Number: WAT271082
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271067 - Plunger, Oriented (Optional)

Part Number: WAT271067

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. The oriented crystalline structure of this sapphire plunger ensures a harder, smoother exterior surface than a standard plunger, making it even less susceptible to wear. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder ensures that the sapphire rides directly into the center of the plunger seal, reducing wear of both parts while safeguarding pump flow rates and system retention times. Included with the plunger is a pre-mounted C-Clip, which saves remounting time.

WAT271067 - Plunger, Oriented (Optional)
Part Number: WAT271067
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Plungers
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg

Part Number: WAT271066

These optional (black) plunger seals for Waters® Alliance Solvent Management Systems are good alternatives if the standard seal (P/N WAT270938) does not perform well for your specific application.

WAT271066 - Plunger Seals Replacement Kit (Black) 2/Pkg
Part Number: WAT271066
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Replacement Schedule Annually

info

WAT271064 - Pre-Heat Plate Assembly

Part Number: WAT271064

This spare part is a Waters Quality part.

WAT271064 - Pre-Heat Plate Assembly
Part Number: WAT271064
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
Replacement Schedule No

info

WAT271061 - Column Holder for Column Heater

Part Number: WAT271061

This spare part is a Waters Quality part.

WAT271061 - Column Holder for Column Heater
Part Number: WAT271061
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
Replacement Schedule No

info

WAT271054 - Column Heater, Spring

Part Number: WAT271054

This spare part is a Waters Quality part.

WAT271054 - Column Heater, Spring
Part Number: WAT271054
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2790 Separations Module
Replacement Schedule As Needed

info

WAT271040 - Detector DripTray

Part Number: WAT271040

The Detector Drip Tray is mounted on the top cover of the 2690 or 2790 Separations Modules when a detector is placed on top of the Separations Module. It helps to prevent any solvent leaking from the detector from entering the Separations Module.

WAT271040 - Detector DripTray
Part Number: WAT271040
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Accessories
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
2796 Bioseparations Module

info

WAT271028 - Compression Screw, 1/8in., PEEK

Part Number: WAT271028

This Compression Screw is a 1/4-28 flangless compression screw with an inner diameter of 1/8 inch. It is used for locking style degasser fittings.

WAT271028 - Compression Screw, 1/8in., PEEK
Part Number: WAT271028
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category ACQUITY
Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
ACQUITY I-Class BSM
ACQUITY UPLC Binary Solvent Manager
Replacement Schedule As Needed

info

WAT271027 - Ferrule, 1/8in., 2/Pkg

Part Number: WAT271027

This spare part is a Waters Quality part.

WAT271027 - Ferrule, 1/8in., 2/Pkg
Part Number: WAT271027
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Fittings
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271024 - Compression Screw, 1/16in. PEEK

Part Number: WAT271024

This Compression Screw is a 1/4-28 flangless compression screw with an inner diameter of 1/16 inch.

WAT271024 - Compression Screw, 1/16in. PEEK
Part Number: WAT271024
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271023 - Ferrule, 1/16in., Two-piece

Part Number: WAT271023

This Ferrule is a flangeless ferrule with lock ring and an inner diameter of 1/16 inch.

WAT271023 - Ferrule, 1/16in., Two-piece
Part Number: WAT271023
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271022 - Tubing, Solvent Inlet to Vac. Degas

Part Number: WAT271022

This spare part is a Waters Quality part.

WAT271022 - Tubing, Solvent Inlet to Vac. Degas
Part Number: WAT271022
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT271019 - Seal Pack Rebuild Kit w/Needle

Part Number: WAT271019

The Seal Pack Rebuild Kit includes all of the parts necessary to replace seals in the seal body, including the high pressure seals. Replacement of these seals requires use of HPMV Tool Kit (WAT045427). The Rebuild Kit includes: one Teflon washer, one needlewash filter, one upper spacer, one lower spacer, one alignment tube, one wash tube seal, one needle, two high pressure seals, one compression screw, and one ferrule.

WAT271019 - Seal Pack Rebuild Kit w/Needle
Part Number: WAT271019
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Injectors
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg

Part Number: WAT271018

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271018 - Seal Wash, Plunger Seal, Replacement Kit 2/Pkg
Part Number: WAT271018
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT271017 - Seal Wash Face Seal Kit,1/Pkg

Part Number: WAT271017

Integral to the 2690 and 2790 Separations Modules, these seals are part of the seal wash system and help ensure that plunger seal life is maximized.

WAT271017 - Seal Wash Face Seal Kit,1/Pkg
Part Number: WAT271017
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Seals
Product Category Separations Module
Systems
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module
Alliance GPC/V 2000 Systems

info

WAT270989 - Tubing Assembly, Sparge Lines

Part Number: WAT270989

This spare part is a Waters Quality part.

WAT270989 - Tubing Assembly, Sparge Lines
Part Number: WAT270989
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module

info

WAT270986 - Standard Flow Inlet Tubing Assembly

Part Number: WAT270986

The Standard Flow Inlet Tubing Assembly is 0.030in ID stainless steel tubing and is surrounded by blackTeflon tubing.

WAT270986 - Standard Flow Inlet Tubing Assembly
Part Number: WAT270986
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Mechanical
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module
2790 Separations Module
2795 Separations Module

info

WAT270985 - SS Tubing, Transducer to V2

Part Number: WAT270985

This spare part is a Waters Quality part.

WAT270985 - SS Tubing, Transducer to V2
Part Number: WAT270985
Services & Support > Spare Parts > Spare Parts Catalog
PM Kit No
Part Category Tube Assembly (specified)
Product Category Separations Module
Products 2690 Separations Module
2690D Dissolution Separations Module
2695 Separations Module
2695D Dissolution Separations Module