Product Listing:  WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel   to   WAT022476 - Polypropylene 8 x 40 mm snap neck Total Recovery Vial with Polyethylene Septumless Cap, 700 µL,100/pkg

Sorted by Brand
  Product    
info

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026973

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026973 - Tubing, 1/16 in. (1.6mm) O.D. X 0.009 in. (0.23 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026973
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.009 in. (0.23 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE

Part Number: WAT026810

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026810 - Tubing, 1/4 in. (6.4mm) O.D. X 0.19 in. (4.83 mm) I.D. X 10 ft (3.0 m) Length , PTFE
Part Number: WAT026810
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.19 in. (4.83 mm)
Length 10 ft (3.0 m)
Material of Construction PTFE
Outside Diameter 1/4 in. - (6.4 mm)

info

WAT026809 - Tubing, 0.149 in. (3.78 mm) O.D. X 0.119 in. (3 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026809

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026809 - Tubing, 0.149 in. (3.78 mm) O.D. X 0.119 in. (3 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026809
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.119 in. (3 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.149 in. (3.78 mm)

info

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE

Part Number: WAT026808

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026808 - Tubing, 0.125 in. (3.17 mm) O.D. X 0.062 in. (1.57 mm) I.D. X 25 ft (7.6 m) Length , PTFE
Part Number: WAT026808
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 25 ft (7.6 m)
Material of Construction PTFE
Outside Diameter 0.125 in. (3.17 mm)

info

WAT026807 - Tubing, 1/8 in. (3.2mm) O.D. X 0.093 in. (2.36 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026807

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026807 - Tubing, 1/8 in. (3.2mm) O.D. X 0.093 in. (2.36 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026807
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.093 in. (2.36 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/8 in. - (3.2 mm)

info

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026806

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026806 - Tubing, 1/8 in. (3.2mm) O.D. X 0.062 in. (1.57 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026806
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.062 in. (1.57 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/8 in. - (3.2 mm)

info

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026805

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026805 - Tubing, 1/16 in. (1.6mm) O.D. X 0.040 in. (1.02 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026805
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.040 in. (1.02 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel

Part Number: WAT026804

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT026804 - Tubing, 1/16 in. (1.6mm) O.D. X 0.020 in. (0.508 mm) I.D. X 10 ft (3.0 m) Length , Stainless Steel
Part Number: WAT026804
Products > Chromatography Consumables & Columns > Accessories > Tubing
Hardware Type Tubing
Inside Diameter 0.020 in. (0.508 mm)
Length 10 ft (3.0 m)
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT026-04 - PEEK Union, 1/16 in.

Part Number: WAT026-04

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which can damage valves and block columns, thereby increasing maintenance costs.

WAT026-04 - PEEK Union, 1/16 in.
Part Number: WAT026-04
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Compression Screws and Ferrules
Hardware Type Fitting
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025604 - Compression Screws and Ferrules, 5/Pkg

Part Number: WAT025604

Precisely manufactured inside and outside diameters ensure leak-free connections. Waters’® highest cleanliness standards and practices in the handling and packaging eliminate debris, which could damage valves and block columns.

WAT025604 - Compression Screws and Ferrules, 5/Pkg
Part Number: WAT025604
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025566 - Compression Fitting Plug, SS

Part Number: WAT025566

This part is a dead end fitting, male pinplug.

WAT025566 - Compression Fitting Plug, SS
Part Number: WAT025566
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025313 - Compression Screw

Part Number: WAT025313

This is a standard stainless steel compression screw.

WAT025313 - Compression Screw
Part Number: WAT025313
Products > Chromatography Consumables & Columns > Accessories > Fittings
Hardware Type Fitting
Material of Construction Stainless Steel
Outside Diameter 1/16 in. (1.6 mm)

info

WAT025054DV - Deactivated Clear Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg

Part Number: WAT025054DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT025054DV - Deactivated Clear Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg
Part Number: WAT025054DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Deactivated Clear Glass
Septa Type Cap and PTFE Septum
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025054C - LCGC Certified Clear Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg

Part Number: WAT025054C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

WAT025054C - LCGC Certified Clear Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg
Part Number: WAT025054C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified LCGC Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025053DV - Deactivated Amber Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg

Part Number: WAT025053DV

Deactivated vials have a silanized surface to prevent adsorption of highly polar molecules.

WAT025053DV - Deactivated Amber Glass 8 x 40 mm Snap Neck Vial, with Cap and PTFE Septum, 1 mL Volume, 250/pkg
Part Number: WAT025053DV
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Deactivated Amber Glass
Septa Type Cap and PTFE Septum
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025053C - LCGC Certified Amber Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg

Part Number: WAT025053C

Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

WAT025053C - LCGC Certified Amber Glass 8 x 40 mm Snap Neck Vial, 1 mL Volume, 250/pkg
Part Number: WAT025053C
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified LCGC Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Amber Glass
Units in Package 250/pkg
Volume Capacity 1 mL

info

WAT025051 - Clear Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg

Part Number: WAT025051

Waters offers a selection of snap cap vials and snap caps/septa.

WAT025051 - Clear Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg
Part Number: WAT025051
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 15 x 45mm
Format Vial
GlassType Clear Glass
Units in Package 100/pkg
Volume Capacity 4 mL

info

WAT025050 - Amber Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg

Part Number: WAT025050

Waters offers a selection of snap cap vials and snap caps/septa.

WAT025050 - Amber Glass 15 x 45mm Snap Neck Vial, 4 mL Volume, 100/pkg
Part Number: WAT025050
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 15 x 45mm
Format Vial
GlassType Amber Glass
Units in Package 100/pkg
Volume Capacity 4 mL

info WAT023401 - Kalrez Replacement O-ring, 2/pkg
Part Number: WAT023401
Products > Chromatography Consumables & Columns > Accessories

info

WAT023349 - AP-5 Inlet Connect Assy 1/pkg

Part Number: WAT023349

Inlet connector for Water AP-2 Advanced Purification (AP) Column.

WAT023349 - AP-5 Inlet Connect Assy 1/pkg
Part Number: WAT023349
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023347 - AP-5 Ferrule, 10/pk

Part Number: WAT023347

Ferrule for for Water AP-5 Advanced Purification (AP) Column.

WAT023347 - AP-5 Ferrule, 10/pk
Part Number: WAT023347
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023345 - O-RINGS AP-5 5/PK

Part Number: WAT023345

O-Rings Inlet and Outlet (5 pack) for Water AP-5 Advanced Purification (AP) Column.

WAT023345 - O-RINGS AP-5 5/PK
Part Number: WAT023345
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT022999 - Peek Tubing and Fitting Kit

Part Number: WAT022999

The PEEK Tubing and Fitting Kit includes the following: 12 PEEK ferrules, 6 compression screws 10-32 long, 6 compression screws 10-32 short, one PEEK tubing .005in. x 1/16in. x 60in., one PEEK tubing .010in. x 1/16in. x 60in., and 12 compression screw knobs

WAT022999 - Peek Tubing and Fitting Kit
Part Number: WAT022999
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK Tubing
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022998 - 1/16 in. OD x .020 in. ID x 5 ft (1.6mm OD x .508 mm ID x 1.5m), PEEK

Part Number: WAT022998

Waters® tubing and fittings are care?fully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system. Part number WAT033392 has been replaced by this new part number WAT022998.

WAT022998 - 1/16 in. OD x .020 in. ID x 5 ft (1.6mm OD x .508 mm ID x 1.5m), PEEK
Part Number: WAT022998
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.020 in. (0.508 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022997

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022997 - Tubing, 1/16" (1.6mm) O.D. X 0.015" (0.381 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022997
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Length 5 ft (1.5 m)
Material of Construction PEEK

info

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022996

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system. Part number WAT033391 has been replaced by this new part number WAT022996.

WAT022996 - Tubing, 1/16 in. (1.6mm) O.D. X 0.010 in. (0.25 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022996
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.010 in. (0.25 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK

Part Number: WAT022995

Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.

WAT022995 - Tubing, 1/16 in. (1.6mm) O.D. X 0.005 in. (0.127 mm) I.D. X 5 ft (1.5 m) Length , PEEK
Part Number: WAT022995
Products > Chromatography Consumables & Columns > Accessories > Tubing
Category PEEK
Hardware Type Tubing
Inside Diameter 0.005 in. (0.127 mm)
Length 5 ft (1.5 m)
Material of Construction PEEK
Outside Diameter 1/16 in. (1.6 mm)

info

WAT022861 - PTFE/silicone Septum, 144/pkg

Part Number: WAT022861

Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps.

WAT022861 - PTFE/silicone Septum, 144/pkg
Part Number: WAT022861
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Unicam
Certified Not Certified
Dimensions 15 x 45mm
Format PTFE/silicone Septum
Units in Package 144/pkg

info

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg

Part Number: WAT022479

These vials with come pre-assembled for use in dissolution systems.

WAT022479 - Shell Vial, 1mL Glass with caps Installed, Pre-Assembled for Dissolution Systems, 500/pkg
Part Number: WAT022479
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Snap Neck
Dimensions 8 x 40 mm
Format Vial
GlassType Clear Glass
Units in Package 500/pkg
Volume Capacity 1 mL

info

WAT022476 - Polypropylene 8 x 40 mm snap neck Total Recovery Vial with Polyethylene Septumless Cap, 700 µL,100/pkg

Part Number: WAT022476

Clean polypropylene-molded vial, preferred in applications where there is a concern that compound or molecule may stick to a polar glass surface. This vial is a cost effective alternative to glass.

WAT022476 - Polypropylene 8 x 40 mm snap neck Total Recovery Vial with Polyethylene Septumless Cap, 700 µL,100/pkg
Part Number: WAT022476
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Hitachi
Waters 700 Series
Certified Not Certified
Dimensions 8 x 40 mm
Format Total Recovery Vial
GlassType Polypropylene
Septa Type Polyethylene Septumless Cap
Units in Package 100/pkg
Volume Capacity 700 µL