Product Listing:  WAT023326 - AP-5 Glass Column, 50x600 mm, 1/pkg   to   WAT023650 - DeltaPak C18 Column, 300Å, 5 µm, 2.1 mm X 150 mm, 1/pkg

Sorted by Title
  Product    
info

WAT023326 - AP-5 Glass Column, 50x600 mm, 1/pkg

Part Number: WAT023326

Complete AP-5 Glass Column, 50x600 mm

WAT023326 - AP-5 Glass Column, 50x600 mm, 1/pkg
Part Number: WAT023326
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 600 mm
Units in Package 1/pkg

info

WAT023332 - AP-5 Glass Column 50 x 200 mm, 1/pkg

Part Number: WAT023332

Empty 50 x 200mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023332 - AP-5 Glass Column 50 x 200 mm, 1/pkg
Part Number: WAT023332
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 200 mm
Units in Package 1/pkg

info

WAT023333 - AP-5 Glass Column 50 x 300 mm, 1/pkg

Part Number: WAT023333

Empty 50 x 300mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023333 - AP-5 Glass Column 50 x 300 mm, 1/pkg
Part Number: WAT023333
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 300 mm
Units in Package 1/pkg

info

WAT023336 - AP-5 Glass Column 50 x 600 mm 1/pkg

Part Number: WAT023336

Empty 50 x 600mm glass replacement tube for Water Advanced Purification (AP) Column.

WAT023336 - AP-5 Glass Column 50 x 600 mm 1/pkg
Part Number: WAT023336
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
Format AP Glass Column
ID 50 mm
Length (mm) 600 mm
Units in Package 1/pkg

info

WAT023343 - AP-5 Filter, 50 mm, 2/pk

Part Number: WAT023343

Filters (5 pack) for Water AP-5 Advanced Purification (AP) Column.

WAT023343 - AP-5 Filter, 50 mm, 2/pk
Part Number: WAT023343
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > MS and LC-MS Consumables for Biomolecules
Application Protein
Endfitting Type Waters
ID 50 mm
Units in Package 2/pkg

info

WAT023345 - O-RINGS AP-5 5/PK

Part Number: WAT023345

O-Rings Inlet and Outlet (5 pack) for Water AP-5 Advanced Purification (AP) Column.

WAT023345 - O-RINGS AP-5 5/PK
Part Number: WAT023345
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023347 - AP-5 Ferrule, 10/pk

Part Number: WAT023347

Ferrule for for Water AP-5 Advanced Purification (AP) Column.

WAT023347 - AP-5 Ferrule, 10/pk
Part Number: WAT023347
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023349 - AP-5 Inlet Connect Assy 1/pkg

Part Number: WAT023349

Inlet connector for Water AP-2 Advanced Purification (AP) Column.

WAT023349 - AP-5 Inlet Connect Assy 1/pkg
Part Number: WAT023349
Products > Chromatography Consumables & Columns > Accessories > Fittings
Category Fittings (pp 29)

info

WAT023370 - AP-5 Plastic Shield, 50x100 mm, 1/pkg

Part Number: WAT023370

Waters Advanced Purification (AP) columns feature non-metallic construction and adjustable bed height with easy to use coarse and fine adjustments. The AP Glass columns are available in a variety of dimensions. Glass Tubes, Column Jackets, Plastic Shields and other replacement parts are sold separately.

WAT023370 - AP-5 Plastic Shield, 50x100 mm, 1/pkg
Part Number: WAT023370
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Format AP Plastic Shield
ID 50 mm
Length (mm) 100 mm
Units in Package 1/pkg

info

WAT023371 - AP-5 Plastic Shield, 50x200 mm, 1/pkg

Part Number: WAT023371

Waters Advanced Purification (AP) columns feature non-metallic construction and adjustable bed height with easy to use coarse and fine adjustments. The AP Glass columns are available in a variety of dimensions. Glass Tubes, Column Jackets, Plastic Shields and other replacement parts are sold separately.

WAT023371 - AP-5 Plastic Shield, 50x200 mm, 1/pkg
Part Number: WAT023371
Brand: Advanced Purification

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Protein Separations > Advanced Purification Glass Columns
Application Protein
Format AP Plastic Shield
ID 50 mm
Length (mm) 200 mm
Units in Package 1/pkg

info WAT023401 - Kalrez Replacement O-ring, 2/pkg
Part Number: WAT023401
Products > Chromatography Consumables & Columns > Accessories

info

WAT023501 - Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023501

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT023501 - Sep-Pak C18 Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023501
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023513 - Sep-Pak Aminopropyl (NH2) Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023513

Sep-Pak Amino Propyl (NH2) Plus Light cartridges contain a moderately polar, silica-based bonded phase with weakly basic surface. The sorbent can be used as a polar sorbent with different selectivity for acidic/basic analytes or as a weak anion exchanges in aqueous medium below pH 8. Applications include extraction of phenols and phenolic pigments, petroleum fractionation, saccharides and drugs and metabolites. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023513 - Sep-Pak Aminopropyl (NH2) Plus Light Cartridge, 130 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023513
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Aminopropyl (NH2)
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023519 - Sep-Pak Diol Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023519

Silica-based polar bonded phase with neutral character; can be used as an alternative to silica in normal-phase applications, where the acidic character of silica is undesirable or as very weakly interacting phase in aqueous applications; applications include antibiotics from cosmetics; isolation of proteins or peptides by hydrophobic interaction chromatography.

WAT023519 - Sep-Pak Diol Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023519
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Diol
Endcap End Capped
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Reversed-phase
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023525 - Sep-Pak Accell Plus QMA Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023525

Sep-Pak Accell Plus QMA Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023525 - Sep-Pak Accell Plus QMA Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023525
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus QMA
Format/Type Plus Light Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 2 - 8 pH

info

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk

Part Number: WAT023531

Sep-Pak Accell Plus CM Plus Light cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023531 - Sep-Pak Accell Plus CM Plus Light Cartridge, 130 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pk
Part Number: WAT023531
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Accell Plus CM
Format/Type Plus Light Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 130 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023543 - Sep-Pak Florisil Plus Light Cartridge, 145 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk

Part Number: WAT023543

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT023543 - Sep-Pak Florisil Plus Light Cartridge, 145 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pk
Part Number: WAT023543
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Florisil
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 145 mg
Units In Package 50/pkg
Water Wettable Water Wettable

info

WAT023549 - Sep-Pak Alumina A Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT023549

Sep-Pak Alumina A Plus Light cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023549 - Sep-Pak Alumina A Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT023549
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina A
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 280 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023555 - Sep-Pak Alumina B Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk

Part Number: WAT023555

Sep-Pak Alumina B Plus Light cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. These cartridges have a distinctive finned outer body and a reduced internal diameter, which results in an interstitial volume about one-third that of the corresponding Plus-style cartridge. This design allows you to elute fractions in a minimal volume to improve recoveries and reduce solvent consumption, a benefit especially for applications where samples are limited or where excessive dilution is a concern.

WAT023555 - Sep-Pak Alumina B Plus Light Cartridge, 280 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pk
Part Number: WAT023555
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry Alumina B
Format/Type Plus Light Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023575 - Sep-Pak Alumina A 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023575

Sep-Pak Alumina A Vac cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023575 - Sep-Pak Alumina A 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023575
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina A
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023580 - Sep-Pak Alumina B 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023580

Sep-Pak Alumina B Vac cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023580 - Sep-Pak Alumina B 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023580
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina B
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023585 - Sep-Pak Alumina N 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk

Part Number: WAT023585

Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023585 - Sep-Pak Alumina N 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-300 µm Particle Size, 100/pk
Part Number: WAT023585
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT023590

Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The Sep-Pak C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023590 - Sep-Pak C18 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT023590
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023595 - Sep-Pak Silica 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk

Part Number: WAT023595

Polar sorbent, used primarily to adsorb analytes from non polar solvents like hydrocarbons, chloro- or flouro-substituted hydrocarbons or less polar esters and ethers.

WAT023595 - Sep-Pak Silica 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 55-105 µm Particle Size, 100/pk
Part Number: WAT023595
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

WAT023600 - Sep-Pak Florisil 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-200 µm Particle Size, 100/pk

Part Number: WAT023600

Polar, highly active, weakly basic sorbent for adsorption of low to moderate polarity species from nonaqueous solutions.

WAT023600 - Sep-Pak Florisil 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 50-200 µm Particle Size, 100/pk
Part Number: WAT023600
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Florisil
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Water Wettable

info

WAT023605 - Sep-Pak Diol 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023605

Silica-based polar bonded phase with neutral character; can be used as an alternative to silica in normal-phase applications, where the acidic character of silica is undesirable or as very weakly interacting phase in aqueous applications; applications include antibiotics from cosmetics; isolation of proteins or peptides by hydrophobic interaction chromatography.

WAT023605 - Sep-Pak Diol 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023605
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Diol
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Reversed-phase
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023620 - Sep-Pak Accell Plus QMA 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023620

Sep-Pak Accell Plus QMA Vac cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger molecules such as anionic proteins such as immunoglobulins and enzymes. Other applications include isolation of phenolic compounds and removal of acidic pigments in wine, fruit juices, and food extracts. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023620 - Sep-Pak Accell Plus QMA 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023620
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Accell Plus QMA
Format/Type Vac Cartridge
Ion Exch. Capacity 230 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023625 - Sep-Pak Accell Plus CM 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk

Part Number: WAT023625

Sep-Pak Accell Plus CM Vac cartridges contain a silica-based, hydrophilic weak cation-exchanger with large pore size (300Å). The cartridges are designed for extraction of cationic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of molecules such as cationic proteins. Other applications include extraction of steriods, pesticides, and herbicides. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

WAT023625 - Sep-Pak Accell Plus CM 1 cc Vac Cartridge, 100 mg Sorbent per Cartridge, 37-55 µm Particle Size, 100/pk
Part Number: WAT023625
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry Accell Plus CM
Format/Type Vac Cartridge
Ion Exch. Capacity 370 µeq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Ion-exchange
Particle Size 37-55 µm
Pore Size 300Å
Sorbent Substrate Silica
Sorbent Weight 100 mg
Units In Package 100/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk

Part Number: WAT023635

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids in beverages; similar in behavior to reversed-phase HPLC columns.

WAT023635 - Sep-Pak C18 Plus Long Cartridge, 820 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pk
Part Number: WAT023635
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Chemistry C18
Endcap End Capped
Format/Type Plus Long Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 820 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

WAT023650 - DeltaPak C18 Column, 300Å, 5 µm, 2.1 mm X 150 mm, 1/pkg

Part Number: WAT023650

Delta-Pak packings, ideal for the separation of peptides, proteins, and natural products, are based on a highly stable, bonded, endcapped 5µm or 15µm spherical silica. Delta-Pak is available in two different pore sizes (100Å and 300Å) with either C4 or C18 bonded phase. Delta-Pak packings are available in different cartridge and column configurations, providing consistent and predictable scale-up capabilities for milligram-to-gram scale purification. Also, by having the same chemistry available on a high-efficiency 5µm particle, you can easily check the purity of your fractions.

WAT023650 - DeltaPak C18 Column, 300Å, 5 µm, 2.1 mm X 150 mm, 1/pkg
Part Number: WAT023650
Brand: DeltaPak

Products > Chromatography Consumables & Columns > Columns > Bioseparations Columns & Consumables > Peptide Separations > Delta-Pak Columns
% Carbon Load 17
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format Column
ID 2.1 mm
Length (mm) 150 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 5 µm
Particle Substrate Silica
Pore Size 300Å
Surface Area 125
USP Classification L1
Units in Package 1/pkg
pH Range 2 - 8