Product Listing:  186004572 - DisQuE Quechers, 150 mg MgSO4 & 50 mg PSA, 2 mL Tube, 100/pkg   to   186004649 - Oasis MAX 1 cc Vac Cartridge, 10 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Sorted by Title
  Product    
info

186004572 - DisQuE Quechers, 150 mg MgSO4 & 50 mg PSA, 2 mL Tube, 100/pkg

Part Number: 186004572

This is clean-up tube is used for the extract from step 1 in QUECHERS AOAC Method 2007.01. QUECHERS (pronounced catchers) methods are used for multi-pesticide residue analyses in food . This is a 100 pack of tubes containing the d-SPE components.

186004572 - DisQuE Quechers, 150 mg MgSO4 & 50 mg PSA, 2 mL Tube, 100/pkg
Part Number: 186004572
Brand: DisQuE

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 2 mL
Chemistry Dispersive
Format/Type Tube
Mass Spec Compatibility Mass Spec Compatible
Units In Package 100/pkg

info

186004579 - GlycoWorks Rapid Deglycosylation Kit - 2x48

Part Number: 186004579

The GlycoWorks Rapid Deglycosylation Kits are used to support existing RapiFluor-MS (RFMS) customers who are looking to qualify and validate their deglycosylation efficiency with the protocol. It can also be used for complimentary application areas to compare intact with partial PNGase F deglycosylation for site occupancy information (quick screening) and intact O-linked analysis as shown through application notes in the below references with the Waters ACQUITY UPLC Glycoprotein BEH Amide, 300A column. GlycoWorks Deglycosylation Module Contains: (2) 0.080 mL/vial Rapid PNGase F Enzyme (2) 1.50 mL/vial GlycoWorks Rapid Buffer (2) 20 mg/vial RapiGest SF Surfactant

186004579 - GlycoWorks Rapid Deglycosylation Kit - 2x48
Part Number: 186004579
Brand: GlycoWorks

Products > Chromatography Consumables & Columns > Analytical Standards and Reagents
Storage Refrigerator 2 to 8 C

info

186004602 - Certified Sep-Pak Alumina A 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg

Part Number: 186004602

Certified Sep-Pak Alumina A Vac cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. Certified Sep-Pak Alumina A cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004602 - Certified Sep-Pak Alumina A 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg
Part Number: 186004602
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Alumina A
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004603 - Certified Sep-Pak Alumina A 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg

Part Number: 186004603

Certified Sep-Pak Alumina A Vac cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. Certified Sep-Pak Alumina A cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004603 - Certified Sep-Pak Alumina A 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg
Part Number: 186004603
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina A
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004604 - Certified Sep-Pak Alumina A 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg

Part Number: 186004604

Certified Sep-Pak Alumina A Vac cartridges contain a highly active grade of alumina with an acidic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This acidic alumina is also low-capacity ion exchanger in aqueous media. Unlike polymer-based ion exhangers, this sorbent is unaffected by high-energy radioactivity and can be used for radioactive compound isolation. Certified Sep-Pak Alumina A cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004604 - Certified Sep-Pak Alumina A 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg
Part Number: 186004604
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina A
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004605 - Certified Sep-Pak Alumina B 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg

Part Number: 186004605

Certified Sep-Pak Alumina B Vac cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. Certified Sep-Pak Alumina B cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004605 - Certified Sep-Pak Alumina B 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg
Part Number: 186004605
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Alumina B
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004606 - Certified Sep-Pak Alumina B 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg

Part Number: 186004606

Certified Sep-Pak Alumina B Vac cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. Certified Sep-Pak Alumina B cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004606 - Certified Sep-Pak Alumina B 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg
Part Number: 186004606
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina B
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004607 - Certified Sep-Pak Alumina B 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle sSize, 30/pkg

Part Number: 186004607

Certified Sep-Pak Alumina B Vac cartridges contain a highly active grade of alumina with a basic surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This basic alumina is also low-capacity ion exchanger in aqueous media. Sep-Pak Alumina B Vac cartridges can be used to extract phospholipids, steroids, and catecholamines. Since Sep-Pak Alumina B is unaffected by high-energy radioactivity, these cartridges can be used for radioactive compound isolation. Certified Sep-Pak Alumina B cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004607 - Certified Sep-Pak Alumina B 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle sSize, 30/pkg
Part Number: 186004607
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina B
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004608 - Certified Sep-Pak Alumina N 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg

Part Number: 186004608

Certified Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. Certified Sep-Pak Alumina N cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004608 - Certified Sep-Pak Alumina N 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 50/pkg
Part Number: 186004608
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004609 - Certified Sep-Pak Alumina N 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg

Part Number: 186004609

Certified Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. Certified Sep-Pak Alumina N cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004609 - Certified Sep-Pak Alumina N 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg
Part Number: 186004609
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004610 - Certified Sep-Pak Alumina N 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg

Part Number: 186004610

Certified Sep-Pak Alumina N Vac cartridges contain a highly active grade of alumina with a neutral surface chemistry. The aluminum oxide surface provides an extremely polar surface for analyte retention and has properties of a Lewis acid. This normal phase sorbent is similar in use to silica; however, it is slightly more stable than unfunctionalized silica under high pH conditions. This neutral alumina is suitable for applications such as synthetic crude oil fractionation. Certified Sep-Pak Alumina N cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004610 - Certified Sep-Pak Alumina N 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-300 µm Particle Size, 30/pkg
Part Number: 186004610
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Alumina N
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-300 µm
Pore Size 120Å
Sorbent Substrate Alumina
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 10 pH

info

186004611 - Certified Sep-Pak Florisil 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pkg

Part Number: 186004611

Certified Sep-Pak Florisil Vac cartridges contain a very polar, highly active, weakly basic sorbent for the adsorption of low to moderately polar species from non-aqueous solutions. These cartridges are specifically designed for the adsorption of pesticides. Other applications include extraction of polychlorinated biphenyls (PCBs) in transformer oil. Certified Sep-Pak Florisil cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004611 - Certified Sep-Pak Florisil 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-200 µm Particle Size, 50/pkg
Part Number: 186004611
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Florisil
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Water Wettable

info

186004612 - Certified Sep-Pak Florisil 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-200 µm Particle Size, 30/pkg

Part Number: 186004612

Certified Sep-Pak Florisil Vac cartridges contain a very polar, highly active, weakly basic sorbent for the adsorption of low to moderately polar species from non-aqueous solutions. These cartridges are specifically designed for the adsorption of pesticides. Other applications include extraction of polychlorinated biphenyls (PCBs) in transformer oil. Certified Sep-Pak Florisil cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004612 - Certified Sep-Pak Florisil 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 50-200 µm Particle Size, 30/pkg
Part Number: 186004612
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Florisil
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable

info

186004613 - Certified Sep-Pak Florisil 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-200 µm Particle Size, 30/pkg

Part Number: 186004613

Certified Sep-Pak Florisil Vac cartridges contain a very polar, highly active, weakly basic sorbent for the adsorption of low to moderately polar species from non-aqueous solutions. These cartridges are specifically designed for the adsorption of pesticides. Other applications include extraction of polychlorinated biphenyls (PCBs) in transformer oil. Certified Sep-Pak Florisil cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004613 - Certified Sep-Pak Florisil 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 50-200 µm Particle Size, 30/pkg
Part Number: 186004613
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Florisil
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 50-200 µm
Pore Size 60Å
Sorbent Substrate Florisil
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Water Wettable

info

186004614 - Certified Sep-Pak Silica 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pkg

Part Number: 186004614

Certified Sep-Pak Silica Vac cartridges contain a polar sorbent that is used primarily to adsorb analytes from non-polar solvents like hydrocarbons, chloro- or fluoro-substituted hydrocarbons, or less polar esters and ethers. Certified Sep-Pak Silica Vac cartridges can also be used in an aqueous medium as a cation exchanger of intermediate strength. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments. Certified Sep-Pak Silica cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low-level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004614 - Certified Sep-Pak Silica 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pkg
Part Number: 186004614
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 200 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

186004615 - Certified Sep-Pak Silica 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pkg

Part Number: 186004615

Certified Sep-Pak Silica Vac cartridges contain a polar sorbent that is used primarily to adsorb analytes from non-polar solvents like hydrocarbons, chloro- or fluoro-substituted hydrocarbons, or less polar esters and ethers. Certified Sep-Pak Silica Vac cartridges can also be used in an aqueous medium as a cation exchanger of intermediate strength. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments. Certified Sep-Pak Silica cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low-level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004615 - Certified Sep-Pak Silica 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 50/pkg
Part Number: 186004615
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

186004616 - Certified Sep-Pak Silica 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 30/pkg

Part Number: 186004616

Certified Sep-Pak Silica Vac cartridges contain a polar sorbent that is used primarily to adsorb analytes from non-polar solvents like hydrocarbons, chloro- or fluoro-substituted hydrocarbons, or less polar esters and ethers. Certified Sep-Pak Silica Vac cartridges can also be used in an aqueous medium as a cation exchanger of intermediate strength. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments. Certified Sep-Pak Silica cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low-level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004616 - Certified Sep-Pak Silica 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 55-105 µm Particle Size, 30/pkg
Part Number: 186004616
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

186004617 - Certified Sep-Pak Silica 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 55-105 µm Particle Size, 30/pkg

Part Number: 186004617

Certified Sep-Pak Silica Vac cartridges contain a polar sorbent that is used primarily to adsorb analytes from non-polar solvents like hydrocarbons, chloro- or fluoro-substituted hydrocarbons, or less polar esters and ethers. Certified Sep-Pak Silica Vac cartridges can also be used in an aqueous medium as a cation exchanger of intermediate strength. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments. Certified Sep-Pak Silica cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low-level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004617 - Certified Sep-Pak Silica 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 55-105 µm Particle Size, 30/pkg
Part Number: 186004617
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry Silica
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Normal-phase
Particle Size 55-105 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 1 - 8 pH

info

186004618 - Certified Sep-Pak tC18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pkg

Part Number: 186004618

Certified Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. Certified Sep-Pak C18 cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004618 - Certified Sep-Pak tC18 3 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pkg
Part Number: 186004618
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry TC18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 200 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186004619 - Certified Sep-Pak tC18 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pkg

Part Number: 186004619

Certified Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. Certified Sep-Pak C18 cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004619 - Certified Sep-Pak tC18 3 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 50/pkg
Part Number: 186004619
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 3 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 50/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186004620 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg

Part Number: 186004620

Certified Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. Certified Sep-Pak C18 cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004620 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg
Part Number: 186004620
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry TC18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186004621 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg

Part Number: 186004621

Certified Sep-Pak C18 Vac cartridges contain a hydrophobic, reverse-phase, silica-based bonded phase that is used to adsorb analytes of even weak hydrophobicity from aqueous solutions. The C18 sorbent is made using the most reproducible bonding technology available, utilizing monofunctional silane chemistry. This sorbent offers a unique selectivity and excellent recovery of anlytes, and is recommended as a general purpose SPE phase for both polar and non-polar analytes. Typical applications include extraction of drugs and their metabolites in serum, plasma or urine, desalting of peptides, isolation of trace organics in environmental water samples and organic acids in beverages. Certified Sep-Pak C18 cartridges are quality controlled to ensure reproducible separations. The cartridges provide superior performance for ultra-low level analyte detection by reducing the potential for background interferences found in many SPE devices. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004621 - Certified Sep-Pak tC18 6 cc Vac Cartridge, 1 g Sorbent per Cartridge, 37-55 µm Particle Size, 30/pkg
Part Number: 186004621
Brand: Sep-Pak

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry C18
Endcap End Capped
Format/Type Vac Cartridge
Mass Spec Compatibility Mass Spec Compatible
Mode Reversed-phase
Particle Size 37-55 µm
Pore Size 125Å
Sorbent Substrate Silica
Sorbent Weight 1 g
Units In Package 30/pkg
Water Wettable Not Water Wettable
pH Range 2 - 8 pH

info

186004623 - ACQUITY UPLC Protein BEH C4 VanGuard Pre-column, 300Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg

Part Number: 186004623

Waters Protein Separation Technology (PrST) columns are QC tested and optimized to separate proteins based on size, hydrophobicity and isoelectric point. If you compare to traditional C18 phases, the C4 ligand is less retentive and will minimize protein carryover, increase protein recovery, and improve peak capacity. The VanGuard pre-column connects directly to the inlet of the ACQUITY UPLC column which minimizes extra columns volumes and reduces leaking by eliminating additional connections.

186004623 - ACQUITY UPLC Protein BEH C4 VanGuard Pre-column, 300Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg
Part Number: 186004623
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
Application Protein
Chemistry C4
Endfitting Type Waters
Format VanGuard Pre-column
ID 2.1 mm
Length (mm) 5 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 300Å
QC Tested Protein
Silanol Activity Low
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 3/pkg
pH Range 1 - 12

info

186004629 - ACQUITY UPLC Peptide BEH C18 VanGuard Pre-column, 300Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg

Part Number: 186004629

VanGuard pre-columns are the first guard column devices designed for routine use at pressures up to 15000 psi (1030 bar) in applications run on the ACQUITY UPLC System. This specific offering contains Waters patented BEH Technology C18, 300A pore, 1.7um particles based and each batch is specifically QC tested with a peptide map to help ensure consistent performance and increased analytical column life.

186004629 - ACQUITY UPLC Peptide BEH C18 VanGuard Pre-column, 300Å, 1.7 µm, 2.1 mm X 5 mm, 3/pkg
Part Number: 186004629
Brand: ACQUITY UPLC

Products > Chromatography Consumables & Columns > Columns > UPLC Columns > ACQUITY UPLC Columns
% Carbon Load 12
Application Peptide
Chemistry C18
Endcapped Yes
Endfitting Type Waters
Format VanGuard Pre-column
ID 2.1 mm
Length (mm) 5 mm
Mode Reversed-Phase
Particle Shape Spherical
Particle Size (dp) 1.7 µm
Particle Substrate Hybrid
Pore Size 300Å
QC Tested Peptide
Silanol Activity Low
Surface Area 90
System UPLC/UHPLC
Technology BEH
USP Classification L1
Units in Package 3/pkg
pH Range 1 - 12

info 186004631 - Assembled 12 x 32 mm Total Recovery Vial with PTFE/Silicone Septum 100 pack
Part Number: 186004631
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Waters 2690
Waters 2695
Waters Acquity
Certified Not Certified
Closure Type Screw Neck
Dimensions 12 x 32mm
Format Vial
GlassType Clear Glass
Septa Type Cap and PTFE/silicone Septum
Units in Package 100/pkg
Volume Capacity 1.1 mL

info

186004632 - Cap with X-Slit PTFE Silicone Septa

Part Number: 186004632

This cap is used with the 10 ml vial for Waters 2707 Autosamper. The cap has an X-Slit PTFE Silicone Septa.

186004632 - Cap with X-Slit PTFE Silicone Septa
Part Number: 186004632
Products > Chromatography Consumables & Columns > Vials, Plates, and Certified Containers
Auto Sampler Bruker
Kontron
Perkin-Elmer
Shimadzu
Tosoh
Unicam
Waters 700 Series
Certified Not Certified
Closure Type Screw Neck
Color Black
Format Cap and preslit PTFE/silicone Septum
Units in Package 100/pkg

info

186004646 - Oasis WCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186004646

The 6 cc Oasis WCX cartridges contain the Oasis WCX sorbent, which is a polymeric reversed-phase, weak ion exchange mixed-mode sorbent that has been optimized for fast, simple, and highly selective sample preparation of strong basic compounds and quaternary amines. Since the Oasis WCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004646 - Oasis WCX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186004646
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry WCX
Format/Type Vac Cartridge
Ion Exch. Capacity 0.75 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186004647 - Oasis WAX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk

Part Number: 186004647

The new Oasis WAX weak anion-exchange SPE chemistry is designed for scientists searching for a fast, simple and highly selective method for sample preparation and cleanup. Oasis WAX is a polymeric reversed-phase, weak ion exchange mixed-mode sorbent that allows for the retention and release of strong acidic compounds (e.g. phosphonates). The elution solvent is MS friendly and the sorbent is completely water wettable.

186004647 - Oasis WAX 6 cc Vac Cartridge, 500 mg Sorbent per Cartridge, 60 µm Particle Size, 30/pk
Part Number: 186004647
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 6 cc
Chemistry WAX
Format/Type Vac Cartridge
Ion Exch. Capacity 0.6 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 60 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 500 mg
Units In Package 30/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186004648 - Oasis MCX 1 cc Vac Cartridge, 10 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: 186004648

The 1 cc Oasis MCX cartridges contain the Oasis MCX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Since the Oasis MCX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. These syringe-barrel-type cartridges are designed for use with vacuum manifolds and automated SPE instruments.

186004648 - Oasis MCX 1 cc Vac Cartridge, 10 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: 186004648
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry MCX
Format/Type Vac Cartridge
Ion Exch. Capacity 1 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 10 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH

info

186004649 - Oasis MAX 1 cc Vac Cartridge, 10 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk

Part Number: 186004649

The 1 cc flangeless Oasis MAX cartridges contain the Oasis MAX, which is a novel, mixed-mode polymeric sorbent that has been optimized to achieve higher selectivity and sensitivity for extracting acidic compounds with anion-exchange groups. Since the Oasis MAX sorbent is water wettable, it maintains its capability for higher retention and excellent recoveries even if the sorbent runs dry, which means there is no need to take extraordinary steps to keep the sorbent beds from drying out during the critical steps prior to sample loading. The flangeless configuration allows the cartridges to be closely packed for processing in specialized automated SPE systems.

186004649 - Oasis MAX 1 cc Vac Cartridge, 10 mg Sorbent per Cartridge, 30 µm Particle Size, 100/pk
Part Number: 186004649
Brand: Oasis

Products > Chromatography Consumables & Columns > Sample Preparation Products
Barrel Size 1 cc
Chemistry MAX
Format/Type Vac Cartridge
Ion Exch. Capacity 0.2 meq/gram
Mass Spec Compatibility Mass Spec Compatible
Mode Mixed mode
Particle Size 30 µm
Pore Size 80Å
Sorbent Substrate Copolymer
Sorbent Weight 10 mg
Units In Package 100/pkg
Water Wettable Water Wettable
pH Range 0 - 14 pH